Horizontal Blue Yellow Orange Alluminium Ball Valve PneumatIc Actuator

Material

alluminium

Pressure

3-7bar

Size

32-210

Type

Switching

Connection

Mounting Pad

Payment

TT/LC

Port

Ningbo/Shanghai

Get a inquiry

Product Description

The horizontal pneumatic actuator is an actuator that rotates the angular travel of the output shaft. It can be mounted to various rotary opening and closing valves such as butterfly valves and ball valves.

Horizontal actuators can be configured with a variety of functional options:

1) Basic actuator

2) Actuator + intelligent control unit

3) Actuator + position feedback

4) Actuator + Smart Locator

5) Actuator + position sensor

Bore size specification	20mm - 400mm
Torque (N.M)	5.NM to 2000 N.M
Rotation angle	90° (standard) 180° (selection) 120° (selection)
Piston structure	rack (standard) fork (selection)
Stroke adjustment	The piston has an adjustable range of ±4° at both ends
Air source pressure	maximum -8bar, minimum -2Bar
Standard temperature	-20℃ ~ +80℃
Low temperature type	-40℃ ~ +80℃
High temperature type	-15℃ ~ +150℃
Material:	aluminum alloy, stainless steel
Color:	natural, white, blue, red, can also be configured according to customer requirements
Installation standard	ISO 5211, suitable for indoor or outdoor installation

Latest information

2019.03.14

How Do I Install A Flange Ball Valve?

1) Remove the protective cover on both sides of the flange end and rinse and clean the valve in a fully open state. 2) Before installation should be in accordance with the specified signal (electricity or gas) for the whole machine test...

2019.03.12

What To Pay Attention To When Installing A Spiral Ball Valve

1) installation location, height, import and export direction must meet the design requirements, threaded connection should be firmly tight. 2) All kinds of manual valves installed on the insulation pipe, the handle must not be down.

2019.06.28

Common Faults Of Flange

Flange in the continuous production of modern industrial corrosion erosion by the medium temperature and pressure vibration, the influence of such factors as inevitably leak problems due to the sealing surface machining error of the size.